Trimark Launches Trimark Academy
May 27, 2026
A Comprehensive Training Ecosystem for Power‑Industry Professionals Folsom, CA, June 2, 2026 — Trimark has announced Trimark Academy, a structured…
Expert insight helps lower your risk and reduce costs -- a direct benefit to your bottom line.
Better for the Owner! Better for the Integrator! Better for the Grid!
End-to-end guidance from experts who have guided over 900 resources to successful grid connection.
The Trimark Operations Center (TOC) helps you maintain compliance and ensure accurate data.
A Comprehensive Training Ecosystem for Power Industry Professionals
Trimarkl's OCC delivers NERC-compliant monitoring, alarm response, dispatch, and failover capabilities.
We've got you covered with Services from concept to commissioning and Products from panel to the point of interconnect.
SCADA systems keep energy facilities running day in and day out. From monitoring voltage levels to managing remote controls across a wide grid, SCADA plays a key role in how electric power systems run smoothly. Any slip-ups in communication or delayed responses could cause real problems for time-sensitive operations. These systems depend on accurate, real-time data to make quick decisions, and that only works when the network connection is working as it should.
That network connection is the backbone of the whole setup. It’s what lets equipment out in the field share data with control centers. When everything connects properly, operators get the updates they need without delays. But when there are problems with the connection, things break down fast. Delays, data gaps, or total outages can throw off operations, reduce reliability, and make it harder to meet delivery goals. So keeping a clean, steady flow of communication is something no one can afford to overlook.
Connectivity issues aren’t always dramatic, but they can still cause big headaches. Some go unnoticed for a while, quietly affecting system efficiency before becoming big enough to demand attention. Understanding what usually goes wrong is the first step toward addressing it.
Here are some of the most common problems seen in SCADA networks:
– Latency: High latency can cause delays between equipment input and system response. This becomes a bigger problem in real-time operations where timing matters.
– Packet Loss: Dropped packets mean incomplete data. Even small gaps can mess up system responses or create confusion during fault detection.
– Network Congestion: If too much data tries to move through the network at once, it can slow down or block important information from getting through.
– Outdated Hardware: Legacy communication devices might not handle newer protocols or the amount of data modern systems send. These often become chokepoints.
– Unreliable Links: Wireless networks or faulty cabling can lead to inconsistent performance and frequent breakdowns.
– Configuration Problems: A poorly set up device or mismatched protocol can cause communication errors across multiple points in the system.
These problems don’t just impact one section of the SCADA system. They ripple across the entire operation. One example might be a solar farm sending real-time performance data to the grid operator. If there’s too much latency or data loss, the operator could receive flawed inputs and adjust system settings based on bad information. This might lead to uneven power delivery or unnecessary curtailment, both of which cut into revenue and raise the risk of system instability.
Spotting these issues before they spiral means knowing the warning signs and taking action quickly. Diagnostics play a big part in this, and we’ll cover those next.
Knowing there’s a problem is one thing. Finding out where and why adds another layer of difficulty. Effective diagnosis takes a mix of tools, checks, and strategy.
Start by setting up network monitoring tools. These can help capture data flow snapshots and expose unexpected dips, delays, or other abnormalities. Once you track down something out of place, it’s easier to trace it to a source—whether that’s a single device or a chunk of the network.
Next, inspect the gear. Devices that are too old for today’s demands might slow things down or break communication entirely. Updating incompatible hardware or firmware can close gaps that were hard to spot. Along the same lines, it helps to run routine configuration audits. Settings can throw things off in unexpected ways, especially in large systems. Regular reviews help keep everything aligned with operational goals.
Diagnostic protocols like ICMP pings and traceroutes can also provide critical visibility. These show where communication gets stuck or delayed. That can help narrow the field fast, making fixes more targeted and less disruptive. Together, these tactics help turn vague connection problems into solvable issues.
Once you know what’s going wrong, it’s time to build a system that avoids those pitfalls. Keeping SCADA systems working as they should means staying a step ahead of disruptions.
1. Regular Software Updates: Keeping all system components current helps maintain compatibility and closes known performance or security holes.
2. Network Segmentation: By breaking up the system into smaller sections, failures or delays in one part don’t affect the whole operation. This limits the damage and makes targeted fixes simpler.
3. Redundancy Systems: Alternate communication pathways kick in when the main one fails. This keeps systems running even when problems emerge.
4. Traffic Flow Management: Using quality of service settings allows critical info to reach its destination first. It’s a way to prevent clogging and delays during high data use times.
5. Routine Testing: Ongoing testing under different conditions helps verify that the network performs well not just today, but in stormy weather or peak usage scenarios.
These strategies don’t just keep things stable. They bring consistency and allow operators to respond with confidence. The end result is better performance, fewer gaps in service, and an SCADA system that delivers what it promises.
Technology keeps changing and your SCADA setup needs to keep up. Getting ready for whatever comes next starts with smart planning.
Look for upgrades that allow your network to scale. That way you won’t need to rip out infrastructure just because your site grows or new tech becomes the standard. When newer systems like 5G become accessible, they could boost speed and reduce delays in ways current setups can’t manage. Building a system that’s ready for those advancements can save time and money later.
Also, invest in the people running the system. Staff who know how to use the latest tools and networks are better prepared to solve problems and respond to changes. Training turns updates from confusing to empowering, helping the whole facility run better.
If every part of your setup—from equipment to staff—is ready for change, you’ll be in a better spot to weather problems and take advantage of upgrades as they arrive.
Keeping SCADA systems connected and stable is no easy task, especially as networks grow, age, and shift to meet new demands. The risk tied to poor connectivity—missed data, slow responses, or losses in revenue—is just too high to ignore. Technological upgrades and preparedness play a huge part, but so do smart strategies and access to expert support.
Trimark Associates, Inc. brings experience and planning help for teams who want to maximize uptime and keep their systems reliable. With thoughtful design, diagnostics, and implementation, we help eliminate common failures before they create problems. We’re here to support you every step of the way in building a SCADA network that works when you need it most.
For those interested in strengthening their network systems, taking time to develop SCADA control strategies can greatly enhance reliability and performance. Trimark Associates, Inc. offers insights into planning and consulting that can guide you through building a more robust SCADA network. Explore our approach to ensuring that energy facilities operate smoothly and efficiently. With the right setups, unpredictable network issues can be minimized, boosting both confidence and capability within your operations.
A Comprehensive Training Ecosystem for Power‑Industry Professionals Folsom, CA, June 2, 2026 — Trimark has announced Trimark Academy, a structured…
Troubleshooting issues and correcting problems that arise in operating critical infrastructure is a demanding job – everything is high priority….
Trimark is pleased to announce that Colin Tepfer has joined the company as Director of Training and Education. Colin is responsible…
February 3, 2026 — Trimark is pleased to announce that the United States Patent and Trademark Office has officially granted…
Trimark Associates, Inc. (Trimark), the industry leader in intelligent energy control, advanced metering, and regulatory compliance, has announced that Rajinita…
First Resources in Edwards/Sanborn Project Reach Commercial Operation. Folsom, CA, January 4, 2022 – The first four phases of the…
Project Type: PV generating facility rated at 20 MW Location: Los Angeles County, CA Client/EPC: Cupertino Electric/sPower Products/Services: Trimark provided…
Project Type: PV generating facilities rated at 3 MW each Location: Palmdale/Lancaster, CA Client/EPC: Swinerton Products/Services: Trimark’s end-to-end solution for…
Project Type: 527 MW natural gas-fueled electricity generating plant Location: Carlsbad, CA Client/EPC: NRG Energy Products/Services: Trimark integrated ADS into…
Project Type: PV rated at 200 MW Location: Kern County, California Client: Signal Energy Constructors Products and Services: SCADA, RIG,…
Need a SCADA system that optimizes revenue? Need help meeting interconnection requirements? Want to stay in the market and avoid fines? Weʼve got you!